Sonatest – Sonacoat P
The Sonacoat P provides fast, non-destructive, accurate coating measurements on steel and non-ferrous metals. It is not only paintwork thickness and other coatings you can measure. You can also obtain valuable information concerning the coating structure, such as paint top coats or body fillers. When measured thickness value clearly exceeds the standard paintwork thickness, this would indicate the use of filler material for repair work or repainting. Ideal for car dealers, paint shops and inspectors. Sonacoat P leaves no damage on the surface, no scratches, no grinding required
Sonatest- Sonacoat Easy F & FN
The Sonacoat Easy F measures the thickness of coatings on steel up to 1.4 mm. Ideal for Paint and powder coatings, Paint Shops, Automotive and Ship Building e.g. verification of zinc coatings under paintwork.
The Sonacoat Easy F is coating thickness gauge with an integral probe; optimized for simple applications, providing reliable results, with minimal set up requirements or training. Fast, precise measurements are achieved with great accuracy on flat, rough and curved surfaces.
The Sonacoat Easy FN is coating thickness gauge with an integral probe; optimized for simple applications, providing reliable results, with minimal set up requirements or training.
The Sonacoat Easy FN model also measures non-conductive coatings on non-magnetic metals with automatic substrate recognition. Fast, precise measurements are achieved with great accuracy on flat, rough and curved surfaces.
Sonatest- Sonacoat III
The Sonacoat III is compact and lightweight with multi-functional menu driven performance for fast, practical and precise Coating Thickness Measurement with separate exchangeable probes. It can be used for all types of varnish, paint and electroplated coatings on iron and steel as well as varnish, paint and anodizing coatings on iron/steel and non-ferrous metals and on austenitic stainless steels. The Sonacoat III is suitable both for the laboratory and for use in harsh field conditions.
The IP52 rating gives protection against dust and dripping water. Never has gauge operation been so clear and so straightforward!
Wide range of transducers are available for universal and special measurement tasks. Data processing is straightforward and fast. No cables are required – data can be transferred to a notebook or other equipment via an infrared interface. There is no worry about connector damage, no time wasted in attaching cables.
Three models of the Sonacoat III are available.
Sonacoat III FN 1.5 includes a general purpose, non-detachable probe for use on both ferrous and non-ferrous substrates.
Sonacoat III S uses detachable probes. A range of probes are available to cover a wide variety of requirements.
Sonacoat III Pro The Pro has enhanced data logging (up to 10,000 readings) and statistical analysis.
ElektroPhysik – MiniTest 650
Application
Non-destructive coating thickness measurement:
- Non-magnetic coatings, e.g. steel
- Insulating coatings like varnishes and anodizing aluminium on non-ferrous metal, e.g. aluminium, copper, die-cast zinc
ElektroPhysik – MiniTest 7400
Application
Non-destructive coating thickness measurement:
- Non-magnetic coatings like varnishes, enamels, chromium and zinc on ferromagnetic base materials, e.g. steel
- Insulating coatings like varnishes and anodizing aluminium on non-ferrous metal, e.g. aluminium
ElektroPhysik – MiniTest 3100
– Multi-functional, versatile coating thickness gauge with a
wide range of replaceable probes, memory capacity for
measurement values of 10,000 readings and statistical evaluation.
o Non-destructive coating thickness gauge for:
-Non-magnetic coatings on steel
-Insulating coatings on non-ferrous metals
-Copper layers on insulating substrates
-Powder coatings on steel and non-ferrous metals
ElektroPhysik – MiniTest 700( Series – 725.735.745)
Handy, universally applicable coating thickness gauge in three versions: Integrated probes, cable probes
and interchangeable internal and external probes. Now with Bluetooth and USB connections.
The device is available in 3 versions:
o MiniTest 725: Measuring device with integrated sensor. o MiniTest 735: Sensor connected by cable to the measuring device. o MiniTest 745: The sensor can be optionally plugged into the device (equivalent of an integrated sensor), connected by cable to the device, or connected wireless via Bluetooth to the device.
Application:
o Non-destructive coating thickness measurement of:
– Non-magnetic coatings like varnishes, enamels,
chromium and zinc on ferromagnetic base
materials (e.g. steel)
-Insulating coatings like varnishes and anodising
aluminium on nonferrous metals (e.g. aluminium,
austenitic stainless steel, brass)
ElektroPhysik – Minitest 70
The MiniTest 70 is a lightweight and handy coating thickness gauge (dft gauge) in a pencil format with a built-in sensor Non-destructive coating thickness measurement of o non-magnetic coatings (paint, synthetic materials, chromium etc.) on a ferromagnetic substrate (steel) o insulating coatings (varnish, enamel, synthetic material etc.) on conductive substrates (aluminium, copper, austenitic stainless steel) (only in the FN type models)
ElektroPhysik – Galvano Test
Application
Universal coating thickness measurement for:
- more than 70 combinations of coating and substrate
- measurement of single and multi-layer coatings
- exact measurement from 0.05 to 75 µm
- for nearly all electroplated coatings
Mikrotest
Non-destructive measurement of: o Non-magnetic coatings like varnishes,
enamels, chromium and zinc on ferromagnetic base materials (e.g. steel)
o Electroplated nickel coatings on steel (only the NiFe 50 model)
o Electroplated nickel coatings on non- ferromagnetic substrates (e.g. aluminium,
copper, synthetic materials etc.) (only the Ni 50 and Ni 100 models)
